考虑刀具磨损的数控加工误差的预测研究*

作者：曹焕亚，周纯江 日期：2008-06-23/span> 浏览：3952 查看PDF文档

考虑刀具磨损的数控加工误差的预测研究*

曹焕亚，周纯江
（浙江机电职业技术学院 机械工程系，浙江 杭州 310053）

摘要：将刀具磨损引起的误差通过建立的误差模型进行预测，是虚拟制造中的一项关键技术。通过分析影响刀具磨损的切削参数，针对硬表面的加工材料建立了基于相对切削时间的球头铣刀磨损模型，提出了虚拟制造环境下考虑球头铣刀磨损的复杂曲面加工误差预报方法。实验结果表明：该误差模型预报是有效的，并且为曲面加工误差预测、提高曲面加工精度和效率提供了理论依据。
关键词：刀具磨损；球头铣刀；加工误差；预测
中图分类号：TG714文献标识码：A文章编号：1001-4551(2008)05-0039-03

Research on error prediction in NC manufacturing with consideration of cutter wear
CAO Huanya, ZHOU Chunjiang
(Department of Mechanical Engineering, Zhejiang Institute of Mechanical and Electrical Engineering, Hangzhou 310053, China)
Abstract: To predict the error resulting from cutting tool wear by means of an established error model is a key technique in virtual manufacturing. On the basis of analysis of the cutting parameters affecting milling cutter wear and hard surfaces of cutting material, a ballend cutter wear model based on cutting time was established, and the way to predict complex curved surfaces processing error in terms of the ballend milling cutter wear in digital manufacturing was put forward . The experiments prove that model prediction is effective, which provides theoretical principle for error prediction of curved surface processing and for improvement of accuracy and efficiency of curved surface processing.
Key words: cutting tool wear; ballend milling cutter; manufacturing error; prediction
参考文献(Reference):
［1］郑建明，李言，肖继明，等.基于神经网络的多特征融合刀具磨损量识别［J］.机械科学与技术，2002,21(1):127-130.
［2］张滢，徐晗,杨者青，等.虚拟制造系统中球头铣刀的磨损预测［J］.工具技术，2006,40(11):32-34.
［3］RATCHEV S. LIU S, HUANG W, et al. Milling error prediction and compensation in machining of lowrigidity parts［J］. International Journal of Machine Tools & Manufacture,2004,44(15):1629-1641.
［4］马玉林，付宜利，孙宏伟.虚拟加工中加工误差分析与预测［J］.机械工程学报，2002,38(11):139-142.
［5］刘强.刀具磨损的偏最小二乘回归分析与建模［J］.北京航空航天大学学报，2000,26(4):457-460.
［6］KIM G M, KIM B H, CHU C N. Estimation of cutter deflection and form error in ballend milling processes［J］. International Journal of Machine Tools & Manufacture,2003,43(9):917-924.
［7］浦文禹.数控加工中心（机床）刀具的优选原则［J］.轻工机械，2005，23（4）：79-80.
［8］林朝平.基于数控加工的干式切削与刀具的研究［J］.轻工机械，2004，22（4）：78-79.