《机电工程》杂志,月刊( 详细... )
中国标准连续出版物号: ISSN 1001-4551 CN 33-1088/TH
主办单位:浙江省机电集团有限公司
浙江大学
主编:陈 晓
副 主 编:唐任仲、罗向阳(执行主编)
总 经 理:罗向阳
出 版:浙江《机电工程》杂志社有限公司
地 址:杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel:+86-571-87041360、87239525
E-mail:meem_contribute@163.com
国外发行:中国国际图书贸易总公司
订阅:全国各地邮局 国外代号:M3135
国内发行:浙江省报刊发行局
邮发代号:32-68
广告发布登记证:杭上市管广发G-001号
在线杂志 |
当前位置: 机电工程 >>在线杂志 |
黄河动床实体模型数控加工技术试验研究*
作者:杨勇1,张军2,杨志方2 日期:2008-08-14/span> 浏览:3542 查看PDF文档
黄河动床实体模型数控加工技术试验研究*
杨勇1,张军2,杨志方2
(1.黄河水利科学研究院 水利部堤防安全与病害防治工程技术研究中心,河南 郑州 450052;
2.郑州大学 机械工程学院,河南 郑州 450052)
摘要:黄河动床实体模型是用于研究黄河流域演变规律及治理开发中关键技术问题和各种治理方案的模型体系,模型的准确性与上述问题的研究精度密切相关。使用分块离散成型的原理,提出了使用数控设备进行模型的分块加工,然后拼装的加工方案,并进行了相关的实验。研究表明,模型误差主要包括单块切削误差和拼接误差两部分。本试验条件下单块切削误差为:0.028 mm;6块拼接误差≤4 mm,使用重复定位校核的方法可将累积误差控制在规定范围内。
关键词:黄河动床;数控加工;数控模型;误差分析
中图分类号:TP391.73文献标识码:A文章编号:1001-4551(2008)07-0008-03
Study on the NC machining technology of movable-bed molds for the Yellow River
YANG Yong1, ZHANG Jun2, YANG Zhi-fang2
(1.Ministry of Water Resources Dike Safety and Disease Control Engineer Center, Institute of Yellow River Water Resources Research,
Zhengzhou 450052, China; 2.School of Mechanical Engineering, Zhengzhou University, Zhengzhou 450052, China)
Abstract: The movable-bed molds for the Yellow River are used to study the evolution law of Yellow River basin. All kinds of treatment schemes are based on the research results. So the precision of the molds is very important to the correctness of those schemes. A NC machining process was put forward to making the movable-bed mold for the Yellow River. The process was based on the segmentation method, which the whole movable-bed mold was divided into several parts. Every partition of the mold was made by using NC programming machine. Then all partitions were assembled into the complete mold. A process test was taken. Through the research, it can be concluded that model error includes cutting error and assembling error. In the expriments, the cuttring error is 0.028 mm and the assembling error less than 4 mm which can be controlled by repeated location checking. The results show that its a efficiency process for making the movable-bed molds for the Yellow River and the error is less than the request value.
Key words: movable-bed molds for the Yellow River; NC machining; NC machining mold; error analysis
参考文献(Reference):
[1]ZHU Qing-ping, LIU Wen-tao. The Digital Yellow River Programme[C]//Asia-Pacific Web Conference 2006. Portugal:[s. n.],2006:1144-1151.
[2]LENG Yuan-bao, YANG Yong, JEFF O, et al. 3D laser scan for terrain survey in model Yellow River[C]. The International Society for Optical Engineering 2005. Portugal:[s. n.],2005.
[3]张柏清,匡伟春,张传才.基于AutoCAD VBA的液压集成块零件图设计[J].机械设计与制造,2007(1):50-51.
[4]吴敬兵,陈定方,余梦华,等.基于VBA的AutoCAD与Excel信息的双向传递[J].武汉理工大学学报:信息与管理工程版,2007,29(2):74-76.
[5]吴卫东.基于UG和点云的全息曲面模型构造技术[J].矿山机械,2006,34(1):101-103.
[6]张导成,许孔联.MasterCAM自动编程尺寸精度控制方法[J].机床与液压,2007,35(3):68-70.
[7]孟凡秋.基于MasterCAM的PC与数控机床间的数控程序传输[J].现代制造,2007(4):86-87.
[8]陈慧贤,姚运萍,段利英.基于数控加工的复杂曲面误差分析[J].组合机床与自动化加工技术,2006(10):35-38.
友情链接