客车后侧门工艺分析和模具设计

作者：李慧敏1，裘海鹰2 日期：2008-08-14/span> 浏览：4025 查看PDF文档

客车后侧门工艺分析和模具设计

李慧敏1，裘海鹰2
(1.杭州职业技术学院 机电工程系，浙江 杭州 310018； 2.东风杭州汽车有限公司，浙江 杭州 311112）

摘要：为了在一副模具上实现对客车后侧门上1 000多个长圆形散热孔的冲孔加工，采用了跳孔的工艺方案和快换凸模的模具结构，解决了散热孔孔距小、模具强度不够的问题，并能快速地适应不同车型的生产，很好地解决了客车后侧门批量小、手工又无法加工生产的问题，是模具低成本投入的一种方法，对设计和制造符合小批量生产的模具，具有很好的借鉴作用。
关键词：后侧门；工艺方案；模具结构
中图分类号：TG386文献标识码：B文章编号：1001-4551(2008)07-0020-03

Process analysis and die design for the rear side doors of the bus
LI  Huimin, QIU Haiying
（1.Department of Mechanical & Eectrical Engineering, Hangzhou Vocational & Technical College,
 Hangzhou 310018, China； 2.Dongfeng Hangzhou Motor Co．, Ltd., Hangzhou 311112, China)
Abstract: In order to punching cooling holes of more than one thousand in the rear side doors of the bus on one die, a processing plan skipped hole and die structure of up die changed quickly were introduced. The problem of punching cooling holes that were close was solved. The strength of the die was improved. The rear side doors of different type were produced. The problem of the rear side doors were low yearly yield and couldnt be produced by handwork was solved well. It was a way that spent less money in manufacturing a die. The die was designed and manufactured for small batch produced, It had a good reference function.
Key words: rear side door; processing plan; die structure
参考文献(Reference):
［1］冲模设计手册编写组．冲模设计手册［M］．北京：机械工业出版社，2003．
［2］龚红英,李少平,张质良,等.工艺参数对镀锌钢板成形性能影响的试验研究［J］.金属成形工艺,2003,21(4)：42-44.
［3］商镄⒊.用プレス成形技g［M］.日刊工I新社,1990.
［4］梁炳文．板金冲压工艺与窍门精选［M］．北京：机械工业出版社，2002．
［5］薛翔，等．冲压模具设计制造难点与窍门［M］．北京：机械工业出版社，2003．
［6］中国模具设计大典编委会．中国模具设计大典［M］.南昌：江西科学技术出版社，2003．
［7］戴雪芬，范希营，支兰珍.先进制造技术在模具生产中的应用研究［J］.轻工机械，2006，24（1）：85-86.