《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

提高植物几何参数测量仪精度的研究

作者:张鸣,熊文波,俞秀金 日期:2008-08-18/span> 浏览:3236 查看PDF文档

提高植物几何参数测量仪精度的研究

张鸣,熊文波,俞秀金
(浙江机电职业技术学院 电气工程系,浙江 杭州 310053)

摘要:针对植物几何参数测量仪中原理误差的问题,建立了几何参数测量仪的实际传动特性方程,通过与理论的线性模型比较获得了仪器的原理误差函数式,分析了测量时接触变形误差对测量结果的影响问题,并在此基础上提出了减小原理误差的方案,借助数值分析方法,以增加测量臂长为例论述了减小原理误差的方法。研究结果表明,该方法具有广阔的推广应用前景。
关键词:仪器原理误差;植物参数测量;电阻应变技术;接触变形误差
中图分类号:TM93文献标识码:A文章编号:1001-4551(2008)08-0066-03

Research on improving the precision of plant geometrical parameter instrument
ZHANG Ming, XIONG Wen-bo, YU Xiu-jin
(Department of Electrical Engineering, Zhejiang Institute of Mechanical & Electrical Engineering, Hangzhou 310053, China)
Abstract: Aiming at instrument theoretical error of plant information, the equation of actual transmission characteristics for plant leaf thickness instruments was established. The theoretical error function of the instrument was obtained. By the comparison between the equation and the theoretical linear model, the problem of the affection from the errors of contact deformation to the survey results was analyzed. A scheme which was to reduce theoretical error was put forward on the basis of above work, with the aid of the method of numerical analysis, the method that reduced the theoretical error was discussed by the example of increasing the length of measurement arm. The experimental results show that the method has wide prospect in the future.
Key words: instrument theoretical error; measurement of plant information; resistance strain technology; contact deformation error
参考文献(Reference):
[1]李国臣,马成林,于海业,等.温室设施的国内外节水现状与节水技术分析[J].农机化研究,2002(4):8-11.
[2]李庆祥.现代精密仪器设计[M].北京:清华大学出版社,2004.
[3]李恒,段发阶,胡斌.用振动补偿实现高精度塑料薄膜厚度检测[J].计量技术,2007,392(4):45-48.
[4]LI Dong-sheng, GAO Xiao-hong, LIU Jiu-qing. Sensors to accurately Measure Geometry Dimension Plant Organs[C]//The Third International Symposium on Instrumentation Science and Technology,2004:824-830.
[5]潘洁,许朝晖.智能测量仪器的误差分析[J].上海计量测试,2006,195(3):26-28.
[6]李东升,高晓红,张文卓,等.植物叶片厚度和果径精密测量传感器的研究[J].传感器技术,2004,264(12):43-46.



友情链接

浙江机械信息网