注塑模模架的集成配置求解方法研究*

作者：孙中炜1，单继宏1,2,毛亚郎1，楼敏1 日期：2008-11-03/span> 浏览：3845 查看PDF文档

注塑模模架的集成配置求解方法研究*

孙中炜1，单继宏1,2,毛亚郎1，楼敏1
（1.浙江工业大学 机械制造及自动化教育部重点实验室，浙江 杭州 310032；2.浙江大学 计算机学院，浙江 杭州 310027）

摘要：注塑模的模架组件中内含大量可重用的设计与工程知识，根据塑料制成品的需求信息，通过配置求解的方法，可敏捷获得模架选型与结构设计方案和制造工艺方案。在注塑模架的配置信息、配置规则等内容详述的基础上，对模架的配置求解进行了深入的研究，给出了集成配置求解方法，并在Web平台上实现了模架配置系统的原型开发。实践证明，该方法可提高模架配置的效率与准确性。
关键词：注塑模；模架；配置求解
中图分类号：TP391文献标识码：A文章编号：1001-4551(2008)09-0048-03

Research on integration solution for mould-base configuration
SUN Zhong-wei1, SHAN Ji-hong1,2, MAO Ya-lang1, LOU Min1
(1.The MOE Key Laboratory of Mechanical Manufacture & Automation, Zhejiang University of Technology, Hangzhou 310032, China;
2.College of Computer Science, Zhejiang University, Hangzhou 310027, China)
Abstract: There are a mass of designing and engineering knowledge iteratively under mould-base components of injection mould. By analyzing the demand of plastic product and configuration reasoning, suitable mould-base could be selected and structural design and manufacture technology solution could be acquired agilely. Base on analyzing configuration information and rules, the method of reasoning was researched, then an integration solution of configuration reasoning was presented, and the example web system was given. The results show that the mthod can improve the efficiency and aceuracy of module configuration.
Key words: injection mould; mould-base; configuration reasoning
参考文献(Reference):
［1］BOURKE R. Product Configurators: Key Enabler for Mass Customization[M]. AUGUST 2000 MIDRANGE ERP, 2000.
［2］王新,谭建荣,孙卫红.基于实例的需求产品配置技术研究［J］.中国机械工程,2006,17(2):146-151.
［3］KOLODNER J L. An Introduction to Case-based Reasoning[M]. California: Morgan Kaufmann Publishers,1993.
［3］PRENTZAS J, HATZILYGEROUDIS I. Integrations of Rule-based and Case-based Reasoning［C］//Proceedings of International Conference on Computer, Communication and Control Technologies(CCCT-03).USA:[s.n.],2003：81-85.
［5］张劲松，王启付，刘清华,等．基于模型的产品智能化配置研究［J］．机械工程学报，2003，39(6)：128-134.
［6］李凯岭,刘军华,白桂恒.注塑模具模架选型中知识库与推理机连接技术的研究［J］.机械科学与技术,2005,24(9):1087-1092.
［7］邓小雷，柴国钟，戴丽娜，等.UG二次开发技术在注塑模架库建立中的应用[J].轻工机械，2006，24（4）：25-27.