基于WinCE的模拟键盘驱动程序的实现

作者：吴弋F1,葛海江1,张能贵2 日期：2008-11-03/span> 浏览：4103 查看PDF文档

基于WinCE的模拟键盘驱动程序的实现

吴弋F1,葛海江1,张能贵2
（1.杭州职业技术学院 电子技术应用研究所，浙江 杭州 310018；2.杭州电子科技大学 计算机应用研究所，浙江 杭州 310018）

摘要：针对有限的嵌入式系统硬件资源，设计并开发高效的底层设备驱动对增强嵌入式系统的运行可靠性和提高系统运行效率至关重要。简要介绍了S3C2410芯片的体系结构，阐述了在WinCE操作系统中编写设备驱动程序的实现过程与方法，并在S3C2410上实现了键盘中断方式的驱动程序，最后，把模拟键盘驱动程序加载到了WinCE内核中。研究结果表明，该实现方法对其他类似设备的驱动开发具有一定的借鉴意义。
关键词：嵌入式系统；设备驱动；S3C2410
中图分类号：TP3文献标识码：B文章编号：1001-4551(2008)09-0103-03

Realization of simulating keyboard driver based on WinCE
WU Yi-min1, GE Hai-jiang1, ZHANG Neng-gui2
(1.Institute of Electronic Technology Application, Hangzhou Vocational & Technical College, Hangzhou 310018, China;
2.Institute of Computer Application, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: With limited embedded systematic hardwares resources, designing and developing high-efficient equipment drive are essential to strengthen embedded operation system dependability and raise systematic efficiency. Firstly, an introduction of the architecture of the S3C2410 processor was given. Secondly, the process and method of programming device driver in WinCE were described, and the keyboard interrupt methods driver in S3C2410 was realized. Finally, the simulation keyboard driver was downloaded to the WinCE. The experimental results show that the method has certain reference meaning for driver development of equipment.
Key words: embedded system; equipment driver; S3C2410
参考文献(Reference):
［1］傅升红.Windows CE.NET下触摸屏驱动程序的开发［J］.嵌入式操作系统应用,2007(4):43-45.
［2］舒云,邱绍峰.基于Windows CE.NET的ADC驱动程序实现与应用的研究［J］.工业控制计算机,2007,20(4):57-61.
［3］微软公司.Microsoft Windows CE设备驱动程序开发指南［M］.北京:北京希望电子出版社,1999.
［4］BOLING D. Microsoft Windows CE程序设计［M］.北京：北京大学出版社,1999.
［5］金华标，常勇.基于Windows CE.NET的嵌入式系统软件开发的研究［J］.武汉理工大学学报:交通科学与工程版,2003,27(2):187-190.