《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于ANSYS的贴片机床身结构优化设计

作者:姜凤鹏,莫锦秋 日期:2008-11-03/span> 浏览:3680 查看PDF文档

基于ANSYS的贴片机床身结构优化设计

姜凤鹏,莫锦秋
(上海交通大学 机械及动力工程学院,上海 200240)

摘要:提高贴片机床身的低阶频率是提高贴片机结构精度、避免共振、降低振幅的有效措施,为了提高其低阶频率,针对影响床身动态性能的3个主要因素,运用有限元分析软件ANSYS,对贴片机床身及其改进结构进行了模态分析,得到了贴片机床身结构的优化模型。分析结果表明,通过改变筋板布置方式、改变板厚和单元格开窗尺寸可对床身进行优化,优化后的结构低阶频率有了明显提高。
关键词:贴片机;ANSYS;结构设计;固有频率
中图分类号:TH122文献标识码:A文章编号:1001-4551(2008)10-0095-03

Optimal design for bed of place machine based on ANSYS
JIANG Fengpeng, MO Jinqiu
(College of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240)
Abstract: It is crucial to increase the low order natural frequency of the placement machine’s bed, which can improve structural precision, avoid resonance and reduce vibration level. In order to increase the low order natural freguency, modal analysis was made with use of ANSYS. By means of studying three main factors which can affect the dynamic characteristics of the bed, the improved structure of the bed was found. Analysis result shows that, the optimized structure can remarkably increase the low order natural frequency.
Key words: placement machine; ANSYS; structural design; natural frequency
参考文献(References):
[1]杜君文.机械制造技术装备及设计[M].天津:天津大学出版社,1998:222-224.
[2]TSAI J S. The identification of dynamic characteristics of a single bolt joint [J]. Journal of Sound and Vibration,1988,125(3):487-502.
[3]HULL P V. Optimal synthesis of compliant mechanisms using subdivision and commercial FEA [J]. ASME Journal of Mechanical Design,2006,128(2):337-348.
[4]张学龄.基于广义模块化设计的机械结构静动态特性分析及优化[D].天津:天津大学机械工程学院,2004.
[5]刘惟信.机械最优化设计[M].北京:清华大学出版社,1994.
[6]余俊,周济.优化方法程序库OPB2原理及应用[M].武汉:华中理工大学出版社,1997.



友情链接

浙江机械信息网