嵌入式数控系统的研究与开发*

作者：王博,张金焕 日期：2008-12-26/span> 浏览：3856 查看PDF文档

嵌入式数控系统的研究与开发*

王博,张金焕
（武汉理工大学 信息工程学院，湖北 武汉 430070）

摘要：利用嵌入式技术、网络与通信技术（包括工业网络与通信技术）的最新成果，提出了嵌入式模块化、网络化数控系统，并具体介绍了其硬件和软件系统平台的模块化开发。通过模块化的嵌入式软硬件结构设计，使得该数控系统性价比更高、资源利用更充分、结构灵活、易于扩展、具有开放架构，并能更好地满足网络化数字制造环境下数控加工需求，解决目前基于工业PC的数控系统面临的一些问题；且通过嵌入式Web实现了更便捷的远程控制与监测。此外，其对探索数控技术新的发展途径和方向方面具有一定的参考作用。
关键词：嵌入式技术；数控系统；模块化；网络化
中图分类号：TP273文献标识码：A文章编号：1001-4551(2008)12-0005-04

Research and development of embedded numerical control system
WANG Bo, ZHANG Jin-huan
(School of Information Engineering, Wuhan University of Technology, Wuhan 430070, China)
Abstract: Embedded module network numerical control system was demonstrated, applying the latest developments of embedded technology, network and communication(including industry network and communication technology). The modular development of the systems software and hardware platform was presented in detail. Through the modular design method, the embedded module network numerical control system has high performance and low cost, effective resource utilization, agile structure, easy expansion, open framework and it could better meet numerical control machining requirement under the environment of network digital manufacturing, which makes it solve the problems confronted with numerical control based on industry PC. Also, convenient long-distance control and inspection were realized through embedded Web. Moreover, the embedded module network numerical system has some exploring effects on new developing method and direction of numerical control technology.
Key words: embedded technology; numerical control system; modularization; network
参考文献(References):
［1］周祖德,余文勇,陈幼平.数字制造的概念与科学问题［J］.中国机械工程,2001,43(1):100-104.
［2］LONG Y H, ZHOU Z D, LIU Q. Study on Componentbased Network Numerical Control［C］. ICSCA’2006, International Conference on Sensing, Computing and Automation, Chongqing, China, 2006.
［3］贾激雷,陈冰.基于嵌入式技术的网络化数控系统［J］.机电工程,2004,21(8):16-18.
［4］孙恺,王田苗,魏洪兴.基于ARM的嵌入式可重构数控系统的设计与实现［J］.机床与液压，2003(6):116-117.
［5］朱利东,殷苏民.基于嵌入式实时操作系统的开放式数控系统的研究［J］.机床与液压,2004(1):92-94.
［6］金晟,傅建中,陈子辰.基于ARM的嵌入式数控系统设计［J］.机电工程,2005,22(2):56- 58.
［7］Texas Instruments. TMS320F28x Enhanced Control Network(CAN) Peripheral Reference Guide ［EB/OL］.[2002-05-15].http://www. ti. com.
［8］王田苗.嵌入式系统设计与实例开发—基于ARM微处理器与μC/OS-II实时操作系统［M］.北京:清华大学出版社,2002.
［9］张承瑞,单诚,王恒.数控G代码解释器的设计与实现［J］.山东大学学报:工学版,2002,32(6):564-568.
［10］张文波,赵海,苏威积,等.基于EWS的HTTP引擎设计［J］.计算机工程,2006,32(18):92-94.
［11］龙毅宏,吴巍,周祖德,等.比值自校正插补算法的研究［J］.组合机床与自动化加工技术,2006(4):30-37.
［12］宁柯军,杨汝清,翁新华.基于多智能体的机电设备嵌入式控制系统设计方法［J］.上海交通大学学报,2005,39(12):2020-2024.