离合器从动盘毂疲劳分析及优化

作者：吴君棋，殷小亮，楼益强，尹R鹏 日期：2009-04-21/span> 浏览：3684 查看PDF文档

离合器从动盘毂疲劳分析及优化

吴君棋，殷小亮，楼益强，尹R鹏
(杭州电子科技大学 机械工程学院，浙江 杭州 310018)

摘要：离合器从动盘存在的主要问题是从动盘毂疲劳强度不足，为了提高离合器的疲劳寿命，利用Pro/E建立了从动盘毂模型，然后利用计算机辅助设计软件Msc. Patran，Msc. Fatigue对从动盘毂进行了强度和疲劳寿命分析，得到了从动盘毂的应力云图和疲劳寿命云图，并进行了优化。分析及优化结果表明，该研究为从动盘毂的设计提供了理论依据。
关键词：离合器；仿真；疲劳；从动盘
中图分类号：TH133.4文献标识码：A文章编号：1001-4551(2009)04-0015-03

Fatigue life analysis and optimization of clutch spider hub
WU Jun-qi， YIN Xiao-liang， LOU Yi-qiang, YIN Ling-peng
(College of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: The insufficient fatigue strength of clutch spider hub is the main problem of clutch driven plate assembly. In order to improve the fatigue life of clutch, the model of the clutch spider hub was created by Pro/E. The intensity and fatigue were analyzed by computer-aided design software Msc. Patran and Msc. Fatigue. The stress and fatigue life nephogram were gotten from the analysis. From the simulation analysis, the clutch spider hub was optimized. The results of analysis and optimization show that the research provides the theoretical basis for spring tooths design.
Key words: clutch; simulation; fatigue; spider
参考文献(References):
［1］徐石安,江发潮.汽车离合器［M］.北京：清华大学出版社,2005.
［2］刘兵山,黄聪.Patran从入门到精通［M］.北京:中国水利水电出版社,2003.
［3］马爱军.Patran和Nastran有限元分析［M］.北京：清华大学出版社,2005.
［4］周传月,郑红霞,罗慧强，等.MSC.FATIGUE疲劳分析应用与实例［M］.香港：科学教育出版社,2005.
［5］林晓斌.基于有限元的疲劳设计分析系统Msc/Fatigue［J］.中国机械工程,1998,9(11):12-15.
［6］彭为,靳晓雄,左曙光.基于有限元分析的轿车后桥疲劳寿命预测［J］.汽车工程,2004,26(4):507-509.
［7］CHEN X, XU S Y, HUANG D X. A critical plane-strain energy density criterion for multiaxial low-cycle fatigue life under non-proportional loading［J］. Fatigue & Fracture of Engineering Materials & structures,1999,22(8):679-686 .
［8］陈国金，陈昌，严小敏，等.基于ADAMS的离合器接合过程仿真研究［J］.机电工程，2008，25（5）：35-38.