硅镜轻量化结构优化与实现*

作者：张云电，管成成，余芳 日期：2009-06-24/span> 浏览：3116 查看PDF文档

硅镜轻量化结构优化与实现*

张云电，管成成，余芳
（杭州电子科技大学 机械工程学院，浙江 杭州 310018）

摘要：为了保证在高的面形精度的前提下尽可能地降低硅镜的质量，通过对多种轻量化结构的分析与对比，确定了具体轻量化结构形式并对其进行了优化设计。通过计算机仿真分析证明了该优化设计方案的可行性，并采用超声加工方法实现了硅镜轻量化加工。试验结果表明：轻量化加工的硅镜镜体质量明显降低；虽然镜面精度有所降低，但仍能满足光学系统的设计要求。
关键词：硅镜；轻量化结构；优化设计；超声加工
中图分类号：TB559文献标识码：A文章编号：1001-4551(2009)06-0028-04

Optimization and implementation for lightweight structure of Sic mirror
ZHANG Yundian, GUAN Chengcheng, YU Fang
(College of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: In order to reduce the weight of silicon mirror as much as possible under the premise of the highprecision of the surface,on the basis of analysis and comparison of a variety of lightholes, a specific structure was determined and its design was optimized. With computer simulation analysis, the design of optimization was proved to be feasible and it was implemented by the approach of ultrasonic machining.The results show that the weight of the Sic mirror is significantly reduced. Although the precision of surface lower slightly, it can be able to meet the design requirements of optical systems.It shows that optimization of the design is effective.
Key words: Sic mirror; lightweight structure; design of optimization; ultrasonic machining
参考文献(References):
［1］BARNES W P. Hexagonal vs trigngular core lightweight mirror structures［J］. Applied Optics,1972,11(12):2748-2751.
［2］SHENG S C. Lightweitht mirror structurebest core sharps: areversal of historical belief［J］. Applied Optics,1988,27(2):354-359.
［3］吴清文,卢锷.自重作用下中心支撑主反射镜面形变化研究［J］.光学精密工程,1996，4(4):23-28.
［4］吴清文.空间相机主镜的力学、温度场特性及轻量化研究［D］.长春：中国科学院长春光机所，1997.
［5］张波,盛和太.ANSYS有限元数值分析原理与工程应用［M］.北京：清华大学出版社，2005.
［6］裴云天,刘正兴.用于空间光学仪器的镜子的轻量化研究［J］.中国空间光学技术,1991,11(6):11-16.
［7］张云电，余芳.硅镜超声加工声学系统设计［J］.机电工程，2008，25（6）：24-26.
［8］张云电.超声加工及其应用［M］.北京：国防工业出版社,1995.