基于PLC的光固化快速成形数控系统*

作者：谢军，侯文杰 日期：2009-06-24/span> 浏览：2905 查看PDF文档

基于PLC的光固化快速成形数控系统*

谢军，侯文杰
（华中科技大学 材料成形与模具技术国家重点实验室，湖北 武汉 430074）

摘要：为简化光固化快速成形（SLA）数控系统的结构、降低系统开发的成本和难度，结合所设计的成形设备特点，利用可编程逻辑控制器（PLC）具有的开发简单、性能可靠等优点，设计了一个基于PLC的光固化快速成形数控系统。该系统将数控系统中各类信号高度集成到一台PLC，并采用串行通信方法，在PLC开发平台上实现了对各底层设备的控制。研究结果表明，此法缩短了快速成形数控系统的开发周期，节省了开发成本。
关键词：光固化快速成形；可编程逻辑控制器；串行通信
中图分类号：TP273文献标识码：A文章编号：1001-4551(2009)06-0047-03

Numerical control system of stereolithography apparatus based on PLC
XIE Jun, HOU Wenjie
(State Key Laboratory of Plastic Forming Simulation & Die Technology,
Huazhong University of Science and Technology, Wuhan 430074, China)
Abstract: Aiming at simpling the structure of numerical control system, and decreasing the cost and difficulty of development, a numerical control system based on the programmable logic controller(PLC) was designed for a stereolithography apparatus(SLA) machine with utilizing the prominent feature of the easy development and higher reliability of the PLC. By the developed numerical system, all control signals was integrated to the PLC, and series communication method was adopted to realize the control of the lower devices. The research indicates that the whole period of development and cost of machine are decreased.
Key words: stereolithography apparatus(SLA); programmable logic controller(PLC); series port communication
参考文献(References):
［1］西门子公司.SIMATIC S7200 PLC用户指南［M］.西门子公司,1999.
［2］吴国中,邓嘉,朱旭平.西门子PLC对步进电动机的控制［J］.自动化技术与应用,2006,25(9):28-30.
［3］廖常初.PLC编程及应用［M］.北京:机械工业出版社,2004.
［4］赵晓明,徐立，邵盛,等.基于VC++的上位机与西门子系列PLC通信的研究［J］.机电工程,2007,24(7):42-44.
［5］陈静.工控系统中VC++实现串行通讯的两种方法及其比较［J］.自动化与仪器仪表,2003(2):57-59.
［6］刘瑞婷,张南平,陈勇.S7200系列PLC自由口模式下实时通信技术研究［J］.计算机技术与发展,2006,12(16):156-158.
［7］束长宝.基于Win32 API函数的PLC与PC串行通信［J］.低压电器,2006(10):17-20.