气液混输漩涡泵内部气相分布与性能预测研究*

作者：李i1，盛英英2 日期：2009-08-18/span> 浏览：3908 查看PDF文档

气液混输漩涡泵内部气相分布与性能预测研究*

李i1，盛英英2
（1.浙江理工大学 机械与自动控制学院，浙江 杭州 310018； 2.浙江省机电设计研究院有限公司，浙江 杭州 310015）

摘要：为研究漩涡泵的气液混输性能，采用Fluent计算软件对泵内部气液两相流场进行了数值模拟。模拟结果初步揭示了该泵内气液两相流动特征,由此可知泵流道内的气泡主要集中在叶片压力面根部，气泡聚集程度随含气率的增加而增加。泵性能预测曲线与试验曲线较为吻合，说明了所采用的计算模型是基本可行的。
关键词：漩涡泵；气液两相流；数值模拟；含气率；性能预测
中图分类号：TH311文献标识码：A文章编号：1001-4551(2009)07-0032-03

Study on performance prediction and gasphase distribution in a gasliquid twophase vortex pump
LI Yi1, SHENG Yingying2
(1. Faculty of Mechanical Engineering & Automation, Zhejiang SciTech University, Hangzhou 310018, China;
2. Zhejiang Institute of Mechanical & Electrical Engineering Co., Ltd., Hangzhou 310015, China)
Abstract: Aiming at investigating the gasliquid twophase mixture transporting performance, Fluent software was applied to simulate the twophase turbulent flow in a vortex pump. The inner twophase flow features were revealed. The result shows that the bubbles in the channel distribute is mainly near the bottom of pressure side, and the aggregation degree of bubbles is enhanced with the increasing of gas volume fraction. Performance predictioncurves are consistent with the testcurves. It shows that the calculating model employed is basically feasible.
Key words: vortex pump; gasliquid twophase flow; numerical simulation; gas volume fraction; performance prediction
参考文献(References):
［1］王冠军,袁丹青,刘吉春,等.叶片形状对旋涡泵性能的影响［J］.轻工机械,2009,27(2):27-31.
［2］余志毅，曹树良，王国玉.叶片式混输泵内气液两相流的数值计算［J］.工程热物理学报,2007，28（1）：46－48.
［3］余志毅，曹树良，王国玉.叶片泵内气液两相流的三维流动数值模型［J］.北京理工大学学报，2007，27(12)：1057－1060.
［4］杨敏官，吴小莲，康灿.轴流泵叶轮内气液两相流动分析［J］.中国农村水利水电，2009（1）：93－95.
［5］黄列群，袁静，陈义红，等.螺旋式纸浆离心泵内部流动的数值模拟［J］.机电工程，2007，24（12）：50－52.
［6］HAZRA S B, STEINER K. Computation of dilute twophase flow in a pump［J］. Journal of Computational and Applied Mathematics,2007,203（2）:444-460.
［7］ZHU Zuchao, XIE Peng, OU Guofu, et al. Design and experimental analyses of smallflow highhead centrifugalvortex pump for gasliquid twophase mixture［J］. Chinese Journal of Chemical Engineering,2008,16(4):528-534.
［8］万映娟,严敬,王桃,等.两种不同叶片的离心叶轮的数值模拟［J］.机械,2008,35(2):12-14.
［9］王红利,宋鹏云,赵龙.固液旋流泵固体颗粒分布的数值模拟研究［J］.机械,2008,35(12):9-12.