基于LabVIEW的汽轮机硬件在环仿真研究

作者：李志强，戴勇，赵文宏，胡克佳 日期：2009-08-18/span> 浏览：3714 查看PDF文档

基于LabVIEW的汽轮机硬件在环仿真研究

李志强，戴勇，赵文宏，胡克佳
（浙江工业大学 机械工程学院，浙江 杭州 310032）

摘要：为了验证新开发的汽轮机控制器的方案以及性能，基于LabVIEW平台，应用硬件在环技术研发了一套汽轮机仿真系统。首先采用频率预曲折双线性变换法将控制系统的数学模型离散化;然后在LabVIEW中进行图形化编程，从而实现了基于虚拟仪器的汽轮机系统的仿真。研究结果表明，该系统有效缩短了新产品研发周期，减少了控制系统的调试时间，能完成控制系统出厂前系统调试、用户现场仿真操作培训和有效辨识控制系统的参数，为实时论证控制器性能的难题提供了解决方法。
关键词：工业汽轮机；LabVIEW；硬件在环
中图分类号：TK262文献标识码：A文章编号：1001-4551(2009)07-0037-03

Hardwareinloop simulation research of steam turbine based on LabVIEW
LI Zhiqiang, DAI Yong, ZHAO Wenhong, HU Kejia
（Institute of Electrical and Mechanical, Zhejiang University of Technology, Hangzhou 310032, China)
Abstract: Aiming at testing and verificating the scheme and function of developing controller, hardwareinloop technology was applied, a set of simulated instrument of steam turbine based on LabVIEW was developed. Bilinear transformation was adopted to discrete the mathematic model of the whole simulation system. Considered that LabVIEW was a novel graphic computer language, the practical realization of mathematical model in LabVIEW was presented. The results indicate that the simulation provides a solution to the difficult problem of real time demonstration controller function, which effectively shortens a new product grinding the hair period, cut down contorl system debugging time before shipping them to customers, the handson training for plant personnels and has an effect to identification controlling system parameters.
Key words: industrial steam turbine; LabVIEW; hardwareinloop
参考文献(References):
［1］时献江，王渝,邵俊鹏，等.工业汽轮机调节系统动态特性的数学模型及仿真［J］.汽轮机技术，2005，47(2)：99-104.
［2］MACMINN S R， THOMAS R J. Microprocessor simulation of synchronous machine dynamic in real time［J］. IEEE Trans. on PWRS,1986(3):220-225.
［3］STEFAN K. The application of a steam engine room simulator to engineering education and training［J］. World Transactions on Engineering and Technology Education,2005,4(1):133-136.
［4］李华会，张宪发，邝泳聪，等.全自动锡膏印刷机人机界面的圆形化设计与实现［J］.机电工程技术,2007,36(5):34-37.
［5］IEEE Committee. Dynamic model for steam and hydro turbines in power system studies［J］. IEEE Trans.,1974,89(1):1904-1915.
［6］KLUJ S. The Potential of Computer Aided Learning and Its Impact on Marine Engineering Education and Training［C］//Proc. 3rd Global Congress on Engng. Educ. Scotland, UK: Glasgow,2002:342-344.
［7］曹李农，李志强，胡克佳，等.基于LabVIEW的工业汽轮机仿真及测试系统［J］.机电工程,2008,25(12):15-18.
［8］李光华,刘立,冯志鹏,等.基于LabVIEW的发动机多传感器信号采集系统［J］.现代制造技术与装备,2006(6):62-64.