基于运动控制卡的服装裁剪机控制系统*

作者：汪嵩杰，史伟民，顾叶琴，秦丰林 日期：2009-11-16/span> 浏览：3328 查看PDF文档

基于运动控制卡的服装裁剪机控制系统*

汪嵩杰，史伟民，顾叶琴，秦丰林
（浙江理工大学 现代纺织装备技术教育部工程研究中心，浙江 杭州 310018）

摘要：为了实现快速、精确的裁剪，设计了一种以工业控制计算机为核心，基于运动控制卡的服装裁剪机控制系统。该系统根据多层裁剪的特点，采用了直接转向切割和抬刀转向切割相结合的方式。介绍了整个系统的硬件构成和软件设计流程，并详细阐述了转向切割的计算方法。样机试验结果验证了该控制系统的有效性，达到了设计精度和速度要求。
关键词：服装裁剪机；运动控制卡；裁剪路径；旋转角
中图分类号：TP273文献标识码：A文章编号：1001-4551(2009)09-0077-04

Control system of clothescutter machine based on the motion control card
WANG Songjie, SHI Weimin, GU Yeqin, QIN Fenglin
(Engineering Research Center of Modern Textile and Equipment Technology,
Ministry of Education, Zhejiang SciTech University, Hangzhou 310018, China)
Abstract: Aiming at high speed and precision, a control system of clothescutter machine based on the industrial computer and the motion control card was designed. According to the characteristics of multilayer cutting, the method of a combination of directturning cutting and upturning cutting was employed. The hardware structures and the software design were introduced. The calculation method of turning cutting was described in detail. The test results of the prototype verify the effectiveness of the control system. The control system achieves the requirement of design accuracy and speed.
Key words: clothescutter machine; motion control card; cutting trajectory; rotation angle
参考文献(References):
［1］华尔天,李国富,应小刚.微机控制的服装裁剪机结构设计［J］.机电工程,2005,22(3)：51-53.
［2］李英琳,张鸿志.单层服装激光自动裁剪机控制系统的开发［J］.天津工业大学学报,2006,25(5)：68-70.
［3］SHI Weimin, ZHANG Libin, XV Fang, et al. Electronic drive control in a rapier loom［C］//Proceedings of the 3nd International Conference on Mechatronics and Information Technology. Chongqing: Information systems and signal processing,2005(6041):345-350.
［4］固高科技有限公司.GE系列运动控制器用户手册［M］.固高科技有限公司，2004.
［5］张建宏,裴仁清,李亚静,等.基于PMAC的开放式数控裁剪机［J］.机电一体化,2002,8(2)：48-49.
［6］李国富,华尔天,叶飞帆,等.数控服装裁剪机控制系统设计［J］.科技通报,2005,21(6)：729-731.
［7］WANG Shihming, LIU Yuanliang, KANG Yuan. An efficient error compensation system for CNC multiaxis machines［J］. International Journal of Machine Tools and Manufacture,2002,42(11):1235-1245.
［8］CORMEN T H.算法导论［M］.潘金贵,译.2版.北京:机械工业出版社,2006.