不同流场构型对微细螺旋孔电解加工的影响*

作者：陈明，王明环，彭伟 日期：2009-11-16/span> 浏览：4112 查看PDF文档

不同流场构型对微细螺旋孔电解加工的影响*

陈明，王明环，彭伟
（浙江工业大学 机械制造及自动化教育部重点实验室，浙江 杭州 310014）

摘要：为了研究微细螺旋孔电解加工中不同流场构型对加工效果的影响，首先介绍了一种微细螺旋孔电解加工（ECM）用工具电极的制作工艺方法；然后，通过改变电极绝缘层厚度构造不同的螺旋孔电解加工流场构型，并对其进行了数值分析；最后，通过电解加工实验对分析结果进行了验证。研究结果表明，在其它条件不变的情况下，涂层厚度越厚，加工效果越好。
关键词：螺旋孔；电解加工；流场构型
中图分类号：V231.1文献标识码：A文章编号：1001-4551(2009)10-0087-03

Effect of different flow field configuration in ECM for microspiral hole
CHEN Ming, WANG Minghuan, PENG Wei
 (The MOE Key laboratory of mechanical Manufacture and Automation, Zhejiang University of Technology, Hangzhou 310014, China)
Abstract: In order to study the processing effect of different flow field configuration in electrochemical machining for microspiral hole, a technique for machining spiral holes using the electrochemical machining(ECM) method was presented. The different flow field configurations were structured through changing the thickness of electrodes insulating layer. Then the numerical analysis for them was made. Finally the analysis result was verified through ECM experimentations. The research results indicate that it has the better processing effect, when the coating thickness is thicken, and the other conditions remain has been unchanged.
Key words: spiral hole; electrochemical machining(ECM); flow field configuration
参考文献(References):
［1］倪萌,朱惠人,裘云,等.航空发动机涡轮叶片冷却技术综述［J］.燃气轮机技术,2005,12(4):25-33.
［2］KOROKY G J, TASLIM M E. Rib heat transfer coefficient measurements in a ribroughened square passage［J］. ASME, Journal of Turbomachinery,1998,120(2):376-385.
［3］NOOTM J, MATTHEIJ R M M. Numerical analysis of turbine blade cooling ducts［J］. Mathematical and Computer Modeling,2000,31(1):77-98.
［4］LAU S C. Measurements of wall heat (mass) transfer for flow through blockages with round and square holes in awide rectangular channel［J］. International Journal of Heat and Mass Transfer,2003,46（21）:3991-4001.
［5］王明环，朱荻,张朝阳.航空发动机叶片竹节孔加工及传热分析［J］.机械科学与技术,2006,25(11):1347-1350.
［6］WEI B, WANG H, FURA J P. Method and tool for electrochemical machining［EB/OL］.［2001-02-22］.http://www.wipo.int/pctdb/en/wo.jsp?wo=200/0/2372.
［7］王建业.电解加工原理及应用［M］.1版.北京：国防工业出版社,2001.