《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于汽车座椅的多功能加载试验机

作者:王志明1,邓明亮1,蔡庆楠1,阚彦魁2 日期:2009-12-30/span> 浏览:2908 查看PDF文档

基于汽车座椅的多功能加载试验机

王志明1,邓明亮1,蔡庆楠1,阚彦魁2
(1.上海大学 机械工程与自动化学院,上海 201822;2.上海睿希测控设备有限公司,上海 201822)

摘要:为了对各种汽车座椅的各项性能指标按国家标准进行检测,研制了多功能加载试验机。该试验机系统包括加载模块、机架模块、升降模块与加载方向转换模块等,对各功能模块进行了设计。根据标准的测试要求,采用了两套力闭环控制系统,采用PID的控制思想,对伺服系统进行了控制。最后,利用本试验机对丰田卡罗拉汽车座椅头枕进行了测试实验。实验结果表明:该系统能实时地显示运行结果,实时地调整控制参数,具有性能可靠、稳定性好等特点,且需达到的力矩值和位移量在要求的误差范围内,满足了对汽车座椅性能的精确测量要求。
关键词:多功能加载;伺服控制;PID;疲劳试验
中图分类号:TP23文献标识码:A文章编号:1001-4551(2009)11-0094-04

Multifunctional loadingtest machine based on the car seat
WANG Zhiming1, DENG Mingliang1,CAI Qingnan1, KAN Yankui2
(1. College of Mechanical Engineering and Automation, Shanghai University, Shanghai 201822, China;
2. Shanghai Rise Test & Control Equipment Co.,Ltd., Shanghai 201822, China)
Abstract: According to the national standards, a multifunctional loadingtest machine was developed for testing the series of the performances of the car seat. The system of the machine was designed of various functional modules, including loading modules, rack modules, landing modules and flip modules. According to the standard testing requirements, the system was adopted two sets of closedloop forcecontrol systems. The PID control concept was adopted to control the servo systems. Finally, the Toyota Corolla car seat headrest was tested by the testing machine. The experimental results show that: the system can display realtimely the results, adjust the control parameters in real time. The testing machine has reliable performance and good stability. And the torque required value and the displacement value are within the tolerance, it meets the accurate measurement of the performances of the car seat.
Key words: multifunctional loadingtest; servo control; PID; fatigue test
参考文献(References):
[1]朱学斌.汽车座椅CAD中的强度特性研究[D].长春:吉林工业大学汽车工程学院,1998.
[2]孙丹丹.座椅被动安全性仿真分析与结构参数化设计[D].长春:吉林大学电子科学与工程学院,2003.
[3]国家质量监督检验检疫总局.GB15083-2006汽车座椅、座椅固定装置及头枕强度要求和试验方法[S].北京:中国标准出版社,2007.
[4]国家质量监督检验检疫总局.GB11550-1995代替汽车座椅头枕性能要求和试验方法[S].北京:中国标准出版社,1997.
[5]汪忠士,汪忠世,刘利.一种新型PID算法在液压实验台中的应用[J].机电工程,2004,21(9):28-30.



友情链接

浙江机械信息网