Kenics型静态混合器在高雷诺数下的压力降研究*

作者：陈立波，聂欣，潘华辰 日期：2009-12-30/span> 浏览：4207 查看PDF文档

Kenics型静态混合器在高雷诺数下的压力降研究*

陈立波，聂欣，潘华辰
（杭州电子科技大学 机械工程学院，浙江 杭州 310018）

摘要：为了获得Kenics型静态混合器在高雷诺数下的压力降规律，在雷诺数Re=4 100~4 000 000范围内，采用计算流体力学（CFD）方法，通过对5种不同长径比的Kenics静态混合器的内部流动进行数值模拟来获取数据。量纲分析表明了Kenics静态混合器的压力降特性可以通过3个无量纲参数：摩擦因数Cf、混合器单元长径比AR、雷诺数Re来描述。根据数值模拟结果作出了这3个参数的关系曲线，提出了一个新的无量纲压力降关系式。研究结果表明，在雷诺数大于200 000时，Cf值趋于恒定，与Re值无关，同时通过和文献中的实验、计算数据进行比较，证实了压力降曲线和关系式的准确性。
关键词：Kenics型静态混合器；计算流体力学；压力降关系式；无量纲参数
中图分类号：TQ051.7文献标识码：A文章编号：1001-4551(2009)12-0108-04

Pressure drop researches for Kenics static mixer at high Reynolds number
CHEN Libo, NIE Xin, PAN Huachen
(College of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: In order to obtain turbulent flow pressure drop rule in SK static mixer, computational fluid dynamics(CFD) method was applied to numerically simulate flow in five Kenics static mixers with different aspect ratio of a mixing element(AR) over a wide range of 4 100 to 4 000 000 to get pressure drop datas. Dimensional analysis revealed that the pressure drop characteristic of the Kenics static mixer can be described by three dimensionless parameters, such as the friction factor, Reynolds number, and aspect ratio of a mixing element. According to the numerical simulation datas, a graphical summary was made to describe the relation of the three dimensionless parameters, a new dimensionless pressure drop correlation was developed. The results indicate that the value of Cf becomes constant and has no correlation with the value of Re when the Renolds number is larger than 200 000. The reliability of the proposed pressure drop rule and correlation is validated by the comparison with various experimental and computational data reported in the literature.
Key words: Kenics static mixer; computational fluid dynamics(CFD); pressure drop correlation; dimensionless parameters
参考文献(References):
［1］宋忠俊.静态混合器在环保领域的应用［J］.化工装备技术,2003,24(5):9-12.
［2］WILKINSON W L, CLIFF M J. An investigation into the performance of a static inline mixer［J］. Second European Conference on Mixing,1977（A2）：15-29.
［3］GRACE C D. Static mixing and heat transfer［J］. Chemical Processing and Engineering,1971,52(7)：57-59.
［4］MORRIS W D, MISSION P M. An experinlental inlestigation of mass tranfer and flow resistance in the Kenics static mixer［J］. Chemical Process and Design,1974,13(3):270-275.
［5］SIR J, LECJAKS Z. Pressure drop and homogenization efficiency of a motionless mixer［J］. Chemical Engineering Communication,1982,16（1）：325-334.
［6］SONG H S, SANG P H. A general correlation for pressure drop in a Kenics static mixer［J］. Chemical Engineering Science,2005,60(21):5696-5704.
［7］KUMAR V, SHIRKE V. Performance of Kenics static mixer over a wide range of Reynolds number［J］. Chemical Engineering Journal,2008,139(2):284-295.
［8］张春梅，吴剑华.SK型静态混合器流体湍流阻力的研究［J］.化学工程,2006,34（10）：28-30.
［9］陶文铨.数值传热学［M］.西安：西安交通大学出版社,2001.
［10］ROBERT W F, ALAN T M. Introduction to Fluid Mechanics［M］. 4th ed. Clohn Wiley & Sons,1994.
［11］PAHL M H, MUSCHELKNAUTZ E. Static mixers and their applications［J］. International Chemical Engineering,1982,22(2):197-205.
［12］CYBULSKI A, WERNER K. Static mixerscriteria for applications and selection［J］. International Chemical Engineering,1986,26(1):171-180.
［13］张瑞鹏，孙杰.量纲分析Kenics静态混合器的压力降关系［J］.石油化工设备,2008,37（2）：17-19.
［14］吴剑华，闫星峰，王宗勇.螺旋式旋流器的径向速度分析［J］.轻工机械，2009（2）：20-22.
［15］王冠军，袁丹青，刘吉春，等.叶片形状对旋流泵性能的影响［J］.轻工机械，2009（2）：29-31.