光电红外成像消旋系统测控技术研究*

作者：周阳1，董国华2，王磊3 日期：2010-03-26/span> 浏览：3178 查看PDF文档

光电红外成像消旋系统测控技术研究*

周阳1，董国华2，王磊3
（1.同济大学 电子与信息工程学院，上海 200092；2. 解放军总参陆航研究所，北京 101121；3. 同济大学 中德学院，上海 200092）

摘要：针对某光电红外成像消旋系统检测项目的需求，设计完成了一套基于PCI总线的自动化测控系统。该系统以旋转变压器和RDC组成轴角编码器，通过数据采集卡实时采集角度数据，再经实时滤波算法和信号变换，显示消旋角度。测控系统采用了积分分离的PID控制方法，驱动直流力矩电机完成消旋功能。该测试系统已成功应用于某光电红外成像消旋系统的维修与测试工作。试验结果表明，本系统设计合理，工作可靠，自动化程度高，具有较强的实用性，满足了自动化测控系统结构化、通用化、模块化的设计要求。
关键词：消旋系统；测控技术；轴角编码器；实时滤波
中图分类号：TP273文献标识码：A文章编号：1001-4551(2010)01-0004-04

Measuring and control research on despun system of optoelectronic infrared image
ZHOU Yang1, DONG Guohua2, WANG Lei3
（1. School of Electronics and Information Engineering, Tongji University, Shanghai 200092, China;
2. Aviation Institute of the General Staff Department of PLA, Beijing 101121, China;
3. ChineseGerman School of Postgraduate Studies, Tongji University, Shanghai 200092, China）
Abstract: For measuring and controlling a kind of despun system of optoelectronic infrared image, a system based on PCI bus was investigated. The system had the axleangle encoder, which was composed of resolvers and RDC. Angle data were realtimely samplesed by DI cards, filted and convertered, and showed out. The integral separated PID controller was used, and the DC motor was drived to despun the image. The system was applied to the fixing and qualitytesting tasks. The experimental result shows that it is practical and effective to improve the measuring and control efficiency.
Key words: despun system; measuring and control; axleangle encoder; realtime filter