Ethernet-CAN总线协议转换器在计量泵远程控制中的应用*

作者：倪孟科，余世明，施金培 日期：2010-03-26/span> 浏览：3612 查看PDF文档

Ethernet-CAN总线协议转换器在计量泵远程控制中的应用*

倪孟科，余世明，施金培
(浙江工业大学 信息工程学院，浙江 杭州 310023)

摘要：为实现对工业现场计量泵的远程控制，设计了一种基于ARM7微控制器LPC2368的以太网和CAN总线协议转换器。介绍了协议转换器各组成部分的硬件电路图及软件流程图。以有限状态机思想实现以太网部分TCP协议，以Modbus协议作为CAN总线应用层协议控制计量泵，给出了一种以太网-CAN总线协议互联的方法。系统结构简单，成本低廉，初步运行结果表明：以太网-CAN总线协议互联方法运行可靠、稳定，具有较好的实用价值。
关键词：计量泵；LPC2368；以太网；控制器局域网络；TCP；有限状态机
中图分类号：TP39文献标识码：A文章编号：1001-4551(2010)02-0050-04

Application of Ethernet-CAN bus protocol converter in metering pump remote control system
NI Meng-ke, YU Shi-ming, SHI Jin-pei
(College of Information Engineering, Zhejiang University of Technology, Hangzhou 310023, China)
Abstract: In order to achieve metering pump remote control, a design of Ethernet-CAN bus protocol converter based on ARM7 microprocessor LPC2368 was put forward. The system hardware circuit and software flow chart were given, finite state machine was used to program TCP protocol, with Modbus protocol as CAN bus application layer protocol to control pump, finally a scheme to connect Ethernet and CAN bus was given. The results show that the system has simple structure, works steadily, low-cost, and has the excellent practical value.
Key words: metering pump; LPC2368; Ethetnet; controller area network(CAN); TCP; finite state mach

参考文献(References):
［1］陈雨田,黄晓斌,陈震，等.计量泵、磁力泵、高速泵和增压泵的应用介绍与市场发展［J］.化工设备与管道,2006,43(6):35-38.
［2］孙兵,何瑾,陈广厦.基于DSP的CAN总线与以太网互联系统研制［J］,仪器仪表学报,2008,29(2):377-380.
［3］CHEN Ji-ming, WANG Zhi, SUN You-xian. Real-time capacity analysis of ethernet in industrial application[C]//Proceedings of the 4th WCICA，2002:2227-2230.
［4］唐鸿儒,丁伟.现场控制网络技术展望［J］.测控技术,2000,19(12):1-4.
［5］KOLLA S, BORDER D, MAYER E. Fieldbus networks for control system implementations［C］//Proceeding of Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology Conference,2003:493-498.
［6］万静华,丁亚军.以太网控制器的嵌入式设备网络互联［J］.单片机与嵌入式系统应用,2001(12):41-43.
［7］周立功.深入浅出ARM7-LPC2300（上册）［M］.广东致远电子有限公司,2004.
［8］FOROUZAN B A, FEGAN S C.TCP/IP协议族［M］.3版.谢希仁,译.北京:清华大学出版社,2006.