《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

船舶柴油机曲轴系的动力学仿真*

作者:戎瑞亚 日期:2010-06-28/span> 浏览:2820 查看PDF文档

船舶柴油机曲轴系的动力学仿真*
戎瑞亚
(浙江海洋学院 船舶与建筑工程学院,浙江 舟山 316000)

摘要:为分析船舶柴油机轴系振动及对船体结构的影响,运用SolidWorks和ADAMS软件构造了4160型船用柴油机轴系的刚体动力学模型,利用虚拟样机技术对曲轴系进行了运动学和动力学仿真,研究了活塞的运动学、连杆和曲柄销载荷的仿真曲线。仿真结果表明,建立的仿真模型与实际相符,为进一步研究船舶柴油机整机振动提供了一种新的设计方法。
关键词:船用柴油机;曲轴系;ADAMS;动力仿真
中图分类号:TP391.9文献标识码:A文章编号:1001-4551(2010)04-0035-03

Dynamical simulation of marine diesel crankshaft system

RONG Ruiya
(School of Navel Architecture and Civil Engineering, Zhejiang Ocean University, Zhoushan 316000, China)

Abstract: Aiming at vibration analysis of marine diesel engine shaft systems and effects on hull structure, the dynamics model of rigid body in the marine diesel engine shaft systems of type 4160 were built by the software of SolidWorks and ADAMS. The motions and dynamics of crankshaft system were simulated based on virtual prototype, and the simulating curves of pistons motions, action force on the link and crankpin were studied. The results indicate that simulation model conforms to its reality, and a new design method is given for further study of the diesel engine vibration.
Key words: marine diesel engine; crankshaft system; ADAMS; dynamical simulation
 



友情链接

浙江机械信息网