《机电工程》杂志,月刊( 详细... )
中国标准连续出版物号: ISSN 1001-4551 CN 33-1088/TH
主办单位:浙江省机电集团有限公司
浙江大学
主编:陈 晓
副 主 编:唐任仲、罗向阳(执行主编)
总 经 理:罗向阳
出 版:浙江《机电工程》杂志社有限公司
地 址:杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel:+86-571-87041360、87239525
E-mail:meem_contribute@163.com
国外发行:中国国际图书贸易总公司
订阅:全国各地邮局 国外代号:M3135
国内发行:浙江省报刊发行局
邮发代号:32-68
广告发布登记证:杭上市管广发G-001号
在线杂志 |
当前位置: 机电工程 >>在线杂志 |
CRH3型动车组牵引传动系统的直接转矩控制研究*
作者:余丹萍,周 盛,江全元* 日期:2010-11-22/span> 浏览:3270 查看PDF文档
CRH3型动车组牵引传动系统的直接转矩控制研究*
余丹萍,周 盛,江全元*
(浙江大学 电气工程学院,浙江 杭州 310027)
摘要:为了研究高速动车组的具体模型结构及其牵引传动控制系统,采用直接转矩控制(DTC)系统控制异步牵引电机,建立了CRH3型高速动车组牵引传动系统的Matlab/simulink仿真模型,整流部分由四象限脉冲整流器输出3 000 V左右平滑的直流电压,逆变部分由直接转矩控制系统驱动牵引电机。该系统能根据CRH3型动车组的牵引、制动曲线模拟动车组牵引、惰行、制动等各种运行工况。整个运行过程中系统的谐波较小,电压/电流相位差基本能保持在同相或反相运行,功率因数基本接近1;在网压波动和突然失电情况下,机车也基本能保持恒速运行。最后,将该模型仿真结果与京津城际高速铁路的部分数据进行了对比验证。研究结果表明,该模型建模基本正确,同时系统具有良好的稳态和动态性能,验证了直接转矩控制方法的有效性。
关键词:CRH3型动车组;牵引/制动特性;四象限脉冲整流器;直接转矩控制;谐波
中图分类号:TH22;TM922
文献标识码:A文章编号:1001-4551(2010)10-0062-07
Research of direct torque control on traction drive system of CRH3 EMU
YU Danping, ZHOU Sheng, JIANG Quanyuan
(Department of Electrical Engineering, Zhejiang University, Hangzhou 310027, China)
Abstract: Aiming at studying the specific model and traction control system of highspeed EMU, using direct torque control(DTC) system to control asynchronous traction motors, the Matlab/Simulink model of a highspeed CRH3 EMU traction and drive system was established. DC voltage of 3 000 V was output with fourquadrant pulse rectifier, and drive traction motors was controlled by DTC system in inverter part. According to the traction and braking curves of CRH3 EMU, the traction, idle line, regenerative brake and other operating condition were simulated. In the entire operation process, harmonics are small, voltage/current phase can be maintained at the same phase or reversedphase, power factor is close to 1. At the situation of net voltage fluctuation and a sudden loss of electricity, the locomotive can maintain constant speed operation. Finally, compared with the data of BeijingTianjin intercity highspeed rail, the results indicate that the model is basically correct, and the system has a good steadystate and dynamic performance, the effectiveness and correctness of direct torque control method are verified.
Key words:CRH3 EMU; traction/braking characteristics; 4quadrant converter; direct torque control(DTC); harmonic
友情链接