《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于单片机的50M3炼铁高炉上料控制设计

作者:张晓杰 何国锋 日期:2007-03-05/span> 浏览:3801 查看PDF文档

基于单片机的50M3炼铁高炉上料控制设计
 
张晓杰  何国锋
(平顶山工学院电气与电子工程系 467001 河南)
要:本文采用AT89C51系列单片机与西门子S7-200小型可编程控制器相结合来控制上料系统。用单片机控制系统上料的顺序、上料的批次、实现大小钟之间的交替打开、关闭,并将结果通过数码管显示到操作台;料车的行进状态及检测、显示则有S7-200可编程控制器和西门子TD200文本显示器共同完成。实际运行表明既降低了成本,又提高了可靠性。
关键词单片机  可编程控制器   智能主令   控制系统
The Control Filling Material System of 50 Smelting Iron Furnace
 
Zhang Xiaojie, He Guofeng
 
(Electric and Electronics Department of Ping Dingshan Institute of Technology 467000 Henan)
 
Abstract In this paper,we integrate AT89C51 Micro Computer Unit and Simatic s7-200 to control filling material system.We use MCU to control the filling material sequence and quantity number of system.Meanwhile ,we also control the opening and closing in turn between big furnace and small one by MCU.The result can be displayed on the control desk by digital display tube.We use PLC with TD-200 to detest ,control and display the advancing state of trolley.
 

Key words   MCU   PLC   intelligent controller     control system

参考文献
[1] 严允进. 炼铁机械[M]. 北京:冶金工业出版社,2004
[2] 马竹梧,刘d. 炼铁生产自动化技术[M]. 北京:冶金工业出版社,2005
[3] 张毅坤,陈善久,裘雪红. 单片微型计算机原理及应用[M].西安电子科技大学出版社,1997

[4] 常斗南. 可编程序控制器原理、应用、实验[M]. 北京:机械工业出版社,2002



友情链接

浙江机械信息网