悬臂式伺服喷标控制系统研制

作者：王海东 日期：2007-05-08/span> 浏览：4558 查看PDF文档

                                                      悬臂式伺服喷标控制系统研制
                                                                王海东
                                     (天津钢管集团公司 特种无逢钢管厂，天津 300301)

摘 要：针对实际钢管标识的需要，与浙江大学合作研制开发了悬臂式喷标系统。该系统应用分布式控制原理，采用交流伺服控制技术，实现了喷头的精确平稳运动；采用基于ARM技术的喷标控制器，实现了16个喷嘴阀的实时协调控制；采用字符解析函数将喷标字符做成模板，实现了喷标控制信息的转换。实际应用表明，该系统的喷标质量达到国际同类产品的先进水平，很好地解决了钢管生产在线喷标问题，并具有操作简单灵活、运行可靠等的特点。
关键词：钢管标识；悬臂式伺服喷标系统；伺服控制

                  Development of servoprinting system on cantilever
                                            WANG  Hai-dong
(Pipe Finishing Factory, Tianjin Pipe Co.〖KG-*3〗, Ltd, Tianjin 300301, China)

Abstract: Due to the requirement of steel pipe identification, An automatic servoprinting system on cantilever was developed in cooperation with zhejiang university. The precise and smooth motion of jetprinter was realized by using; system control hardware for coordinating the actions of sixteen jet valves on jetprinter was designed using ARM technology; printing character was made intospecial template for completing printing information transformation by using parsing function. The fact application results show that, the quality of printing is square with the kindred system around the world. Moreover, there are simple and flexible operating, running credibility in the system.
Key words: steel pipe identification; servoprinting system on cantilever; servo control

参考文献：
［1］姜晓勇．钢管测长、称重、喷标系统的研究与开发［D］．杭州：浙江大学机械与能源学院，2003.
［2］宋红晓，项占琴.龙门式钢管喷标机的研制［J］.机电工程,2005,22（7）：1-3.
［3］唐志峰，项占琴.点阵式自动钢管喷标机的研制［J］.工程设计学报，2003，10（1）：39-43.
［4］魏爱玉，刘元开.伺服电机在点阵式自动喷标机中的应用［J］．机电工程，2003，20(5)：98-100.
［5］〖JP2〗王志伟，成京媛.SPDOS系统点阵字库结构的分析［J］.计算机应用,1994，（3）：48-51.
［6］黄健青，王 平.Turbo C矢量字库的分析和使用［J］.海南大学学报,1995，13(2)：152-154.