液压式地下卷取机自动台阶回避控制仿真

作者：钟 平，吴晓明 日期：2007-07-06/span> 浏览：4259 查看PDF文档

                                       液压式地下卷取机自动台阶回避控制仿真
                                                    钟 平，吴晓明
                           （牡丹江大学 机电系，黑龙江 牡丹江 157011）

摘 要：研制了地下卷取机的控制系统，并制作了仿真模型。系统用压力传感器实现压力闭环，用位置传感器检测位移信号，通过脉冲编码器和计算机编程控制实现了带头自动跟踪和台阶的自动回避控制。仿真模拟了地下卷取机的步进控制过程。仿真结果表明：系统加入微分超前补偿，有利于系统稳定，减少了超调量，提高了系统的响应速度，减少了负载压力的波动；摩擦负载的增加，将使系统的稳态误差增加；合适的负载压力补偿对系统的动态是有利的。
关键词：地下卷取机；液压控制系统；仿真；超前补偿

            Simulation on automatic jumping control of hydraulic down coiler
                                     ZHONG ping, WU Xiaoming
(Department of Mechanics and Electronics, Mudanjiang University, Mudanjiang 157011, China)

Abstract: The control system of down coiler and a simulation model were introduced. The system adopted the pressure sensor to form the pressure circuit. The leading automatic tracing and jumping control were realized. by using the moving position signal, pulse coder and computer programming. The moving step control process were simulated on down coiler. Its stability and response speed were increased by reducing overshoot and the load pressure fluctuation. With the steadystate error of the system appearing due to increased friction, the proper compensation for load pressure is helpful to the dynamic property of system.
Key words: down coiler; hydraulic control system; simulation; lead compensation

参考文献(Reference)：
［1］［日］桑野博明.液压式卷取机的开发［J］.石川岛磨技报（日本）,1980,22(127):349-355.
［2］［日］渡边俊治,松岗律雄,近藤透，等.热带钢轧机地下卷取机卷取技术的提高-台阶回避控制的实用化［C］.第103届日本铁钢协会讲演概要集（日本）,1982:104.
［3］［日］柿田和俊,城户嗣郎,赤时惠,等.液压助卷辊式带材台阶回避控制系统［C］.第100届日本铁钢协会讲演概要集（日本）,1980:360.
［4］赵丙龙，王宏兵，马 忠.卷取机电液伺服踏步控制系统仿真及试验研究［J］.机械工程与自动化，2005，（6）：61.
ZHAO Binglong, WANG Hongbing, MA Zong. Simulation and test research of electrohydraulic servo system in coiler［J］. Mechanical Engineering & Automation,2005,(6):61.
［5］王益群，吴晓明，曹栋璞，等.热连轧卷取机电液伺服控制系统的设计［J］.液压气动与密封，2002，95（5）：1-3.
WANG Yiqun, WU Xiaoming, CAO Dongpu, et al. Design of electrohydraulic servocontrol system for coiler of hot continuous mill［J］.Hgdranlics Pneumatics & Seals,2002,95(5):1-3.
［6］李洪人.液压控制系统［M］.北京：国防工业出版社，1981.