《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编陈 晓
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

微流控芯片热压成型机液压系统

作者:游震洲 日期:2007-07-06/span> 浏览:4368 查看PDF文档

                                微流控芯片热压成型机液压系统
                                                    游震洲
                    (温州职业技术学院 机械工程系,浙江 温州 325035)

摘 要:提出了微流控芯片热压成型方法。介绍了热压成型的原理,并对微流控芯片热压成型机进行了总体设计。分析了热压成型机的液压系统及其器件选择方法,设计了热压成型机的整体液压回路,对液压系统进行了压力精度控制试验。试验结果表明,该系统控制精度在容许的范围之内。
关键词:热压;微流控芯片;液压系统;微全分析系统


                 Hydraulic system in hot embossing machine for microfluidic chip
                                                                   YOU Zhen-zhou
(Department of Mechanical Engineering, Wenzhou Vocational and Technical College, Wenzhou 325035, China)
Abstract: The method of hot embossing technology for microfluidic chip was presented. The hot embossing theory was introduced, and the hot embossing machine of microfluitic chip was designed. The hydraulic system and devices of hot embossing machine were analized. The hydraulic of total machine of hot embossing machine was designed. Experimentsresults show that, the systematic control precision is in allowable scope.
Key words: hot embossing; microfluidic chip; hydraulic system; miniaturized total analysis system

参考文献(Reference):
[1]CHIANG Y M, BACHMAN M, CHU C, et al. Characterizing the process of Cast Molding Microfluidic Systems[C]. SPIE Conference on Microfluidic Device and System II, 1999: Santa Clara, California. SPIE,1999:303-311.
[2]方肇伦.微流控分析芯片[M].北京:科学出版社, 2002.
[3]HOLGER B, ULF H. Hot embossing as a method for the fabrication of polymer  high aspect ratio structures[J]. Sensors and Actuators,2000,83(2):130-135.
[4]LEE L J, MARC J M, KURT W K, et al. Design and fabrication of CD Like microfluidic platform for diagnostic: polymer based microfabrication[J]. 〖WTHZ〗Biomedical Micro Devices,2001,3(4):339-351.
[5]潘开林,陈子辰,傅建中.激光微细加工技术及其在MEMS微制造中的应用[J].制造技术与机床,2002,(3):5-7.
PAN Kailin, CHEN Zichen, Fu Jianzhong. Laser micromachining and its application in the microf abrication of MEMS[J]. Manufacturing Technology & Machine Tool,2002,(3):5-7.
[6]张海峰.全自动聚合物微流控芯片压印机的研究与设计[D].杭州:浙江大学,2005.
[7]韦 鹤.RYJ_II型热压设备关键部件研制及压力系统研究[D].大连:大连理工大学,2005.



友情链接

浙江机械信息网