PLC在胶订机控制中的应用

作者：管力明1，李国栋1，杜 量2，周盛华1 日期：2007-07-09/span> 浏览：3940 查看PDF文档

                                     PLC在胶订机控制中的应用
                     管力明1，李国栋1，杜 量2，周盛华1
（1.杭州电子科技大学 新闻出版学院，浙江 杭州 310018; 2.浙江省机电设计研究院有限公司，浙江 杭州 310009）

摘 要：通过分析胶订机在装订书刊中的工艺流程特点，提出了将PLC应用于书刊装订过程的控制方案。它解决了传统手控装订机在书刊装订中功效低、质量差的问题；控制系统设计方案合理且易实现；程序设计采用可读性强的状态转移图法，非常适合复杂工艺流程。经实时调试，胶订机的装订功效可提高一倍多。实例说明，PLC能为今后印刷设备实现智能控制探索出一条捷径。
关键词：胶订机；可编程控制器；状态转移图；书刊装订

                  Application of PLC on the control of staple pin attacher
   GUAN Liming1, LI Guodong1, DU Liang2, ZHOU Shenghua1
(1.College of News and Publish, Hangzhou Dianzi University, Hangzhou 310018, China;
2.Zhejiang Institute of Mechanical and Electrical Engineering Co. Ltd., Hangzhou 310009, China)

Abstract: By analyzing the features of the staple pin attacher in process flow, a control scheme using the PLC on the process of the binding of books was presented. It resolved the low efficacy and poor quality of the traditional manual control binding machine, the design scheme of the control system was reasonable and easy to achieve, program design used the sequential function chart and adapt to the complex process flow. The efficiency of the staple pin attacher can increase as much again as the former operation through lots of tests. According to the example, the PLC can explore a short cut for the intelligent control of the printing equipment in the future.
Key words: staple pin attacher; programmable logic controller (PLC); sequential function chart; binding of books

参考文献(Reference)：
［1］李俊秀，赵黎明．可编程控制器应用技术实训指导［M］．北京：机械工业出版社，2002.
［2］张万忠，周渊深．可编程控制器应用技术［M］．北京：化学工业出版社，2001.
［3］丁 炜，魏孔平．可编程控制器在工业控制中的应用［M］．北京：化学工业出版社，2004.
［4］YAO Hongliang, YAO Guangshun. Summarizes question which in the PLC application and the use should pay attention［J］. Journal of Anhui Vocational college ofElectronics & Information Technology,2006,5(2):74-76.
［5］JIANG Yongming, XU Feng, JIN Zhenzhen. Research on diversity of state turn diagram[J]. Science and Technotogy of West China,2006(17):36-37.