节气门体试验台的研制

作者：樊留群1,吴俞祥1,马玉敏1,焦兴军2 日期：2007-10-25/span> 浏览：3943 查看PDF文档

节气门体试验台的研制

樊留群1,吴俞祥1,马玉敏1,焦兴军2
（1.同济大学 中德学院,上海 200092； 2.联合汽车电子有限公司，上海 201206）

摘要：节气门用来控制汽车的进气量，其性能的好坏直接影响到发动机的燃油效率和动力性。基于对节气门的功能和耐久性试验方法的研究分析，以美国国家仪器公司（NI）的软硬件开发环境为基础，开发了对节气门的位置传感器、怠速执行器和气门体的试验台。测试台以机械加载结构模拟了实际发动机系统中管路两侧压差对节气门叶片轴形成的作用力，使试验条件高度还原实际状况，提高了试验结论的正确性。
关键词：节气门；试验台；耐久性；虚拟仪器；LabVIEW
中图分类号：TP206文献标识码：A文章编号：1001-4551(2007)10-0010-04

Design and actualization of the throttle test bench
FAN Liuqun, WU Yuxiang, MA Yuming, JIAO Xinjun
(1.The SinoGermany College, Tongji University, Shanghai 200092, China;
2.United Automotive Electronic Systems Co., Ltd., Shanghai 201206, China)
Abstract: The throttle controls the air input of the automobile engine. The performance of the throttle has a direct effect on the engines fuel efficiency and dynamic. Based on the analysis of testing methods for throttles function and endurance, this system, which can be used to test the endurance and reliability of the throttle body and its position sensor as well as the idle speed actuator, was developed with NI LabVIEW and corresponding hardware. Furthermore, an especial mechanical structure was used in the system to simulate the acting force on the rotational axis, which would be caused by the pressure difference between both sides of the throttle in real conditions. In this way, the accuracy of test conclusion can be improved.
Key words: throttle; test bench; endurance; virtual instrument; LabVIEW

参考文献(Reference)：
［1］钱耀义.汽车发动机汽油喷射系统［M］.北京：人民交通出版社，1992.
［2］PATRICK D.试验工程——成本有效的设计、研制和制造指南［M］.李金国,杨光,苏兴荣,等,译.北京：电子工业出版社，2005.
［3］FITZGERALD K. Technology 1991: test and measurement［J］. IEEESpectrum,1991(1):56-58.
［4］WILLIAM. Overview of automotive sensor［J］. IEEE Sensor Journal,2001(1):296-308.
［5］吴明.节气门位置传感器的功能与检测［J］.汽车使用技术,2003(3):25-27.
［6］王秀贞.步进电动机与发动机的怠速控制［J］.机电工程，2004,21(9):64-66.
［7］杨乐平，李海涛，赵勇,等.LabVIEW高级程序设计［M］.北京：清华大学出版社，2003.