基于Windows CE的嵌入式数控系统的设计

作者：白建华,周红飞,潘振峰 日期：2007-10-25/span> 浏览：3900 查看PDF文档

基于Windows CE的嵌入式数控系统的设计

白建华,周红飞,潘振峰
(杭州电子科技大学 机电工程学院,浙江 杭州 310018）

摘要：Windows CE操作系统具有较高的实时性和稳定性，能满足工业控制的需求。设计了基于Windows CE的嵌入式数控系统，包括硬件平台和软件平台的构建。介绍了Windows CE的中断服务程序的设计方法。重点研究了在Windows CE嵌入式平台上的数控系统的软件开发技术。实践证明，基于Windows CE的嵌入式数控系统能够满足数控机床的加工需求。
关键词：Windows CE；数控系统；中断服务程序
中图分类号：TP273；TG659文献标识码：A文章编号：1001-4551(2007)10-0088-03

Design of the embedded numerical control system based on Windows CE
BAI Jianhua, ZHOU Hongfei, PAN Zhenfeng
（College of Mechanical & Electrical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China）
Abstract: The Windows CE operation system can solve problems of high realtime and high stability demands in industrial control. The embedded numerical control system based on Windows CE was designed, including the building of hardware and the software platform. The design process of the interrupt service routine was introduced. The development of software in the embedded numerical control system based on Windows CE was designed. The application in practical situation proves that the embedded numerical control system based on Windows CE operation system can meet the demands of numerical control (NC) machine.
Key words: Windows CE; numerical control system; interrupt service routine

参考文献(Reference)：
［1］陈向群,王雷,马洪兵,等.Windows CE.Net系统分析及实验教程［M］.北京:机械工业出版社，2003.
［2］HOSKE M T. Windows CE embeds itself in automation, control, and instrumentation control ［J］. Engineering, 1998，45（4）：5.
［3］BALLARD A. Windows CE brings real time control to the PC platform［J］. Assembly Automation, 1999,19(4):306-307.
［4］朱志红,陈蔡涛.基于ARM的嵌入式数控系统方案研究与应用［J］.制造业自动化,2005,27(11):40-43.
［5］胡朝斌,王治森,董伯麟,等.基于Windows CE的数控系统的中断机制［J］.中国机械工程,2005,16(9):761-764.
［6］姜波.Windows CE.Net程序设计［M］.北京:机械工业出版社,2007.