基于CAE技术的凸轮轮廓曲线设计

作者：吴百中，宋 荣 日期：2008-04-17/span> 浏览：4209 查看PDF文档

基于CAE技术的凸轮轮廓曲线设计
吴百中，宋 荣
（温州职业技术学院 机械工程系，浙江 温州 325035）

摘 要：针对目前国内企业在间歇运动机构凸轮轮廓曲线设计中所遇到的困难，采用共轭曲线的设计思想和运动模拟仿真的设计思路，并通过案例,介绍了凸轮轮廓曲线的设计方法。通过实体模型验证可知:用此方法得到轮廓曲线的凸轮作为主动件，其从动件的运动状态与初始设定的运动参数相吻合，这一结果给国内企业在解决间歇运动机构凸轮轮廓曲线设计时提供了一种新的思路。
关键词：凸轮；轮廓曲线；运动仿真；共轭

Design of cam contour curve based on CAE technique
WU Baizhong, SONG Rong
(Department of Mechanical Engineering, Wenzhou Vocational & Technical College, Wenzhou 325035, China)

Abstract: Facing some difficult design which exists in the cam contour curve of indexing motion mechanism against domestic company presently, the conjugate contour curve was viewed as the idea of design and the motion animation was used as the method of design. Using a case, the design method of cam contour curve was introduced. The entity model verifies that, if the contour curve of active cam is designed by this way, the motion Parameters of passive cam which matches the active cam coincides to the parameters ever supposed, the design offers a new way for domestic company to design the contour curve of cam presently.
Key words: cam; contour curve; animation; conjugate

参考文献(Reference):
［1]王 皓,张 策.凸轮型间歇机构的创新［J］.机械设计,2001，18（9）：1-3.
［2］TSAY D M, HUANG N J, LIN B J. Geometric design of roller gear cam reducers［J］. Transactions of the ASME,1999,121:172-175.
［3］宋晓华，方坤礼.基于UG的凸轮机构设计和运动仿真［J］.机械研究与应用,2005,18（1）：102-104.
［4］刁彦飞,王艳飞,李立金.应用反转法及坐标旋转变换设计凸轮廓线及Matlab仿真［J］.应用科技,2006，33（5）：1-3.
［5］PALACIOS G, ANGELES J. The generation of contact surfaces of indexing cam mechanisms a unified approach［J］. Proc ASME Design Automation Conference Advances in Design Automation,1990,2:359-364.
［6］QIU H, LIN C J, LI Z Y, et al. A universal optimal approach to cam curve design and its applications［J］. Mechanism and Machine Theory,2005,40(6):669-692.
［7］李红林，贾志欣.气辅成型的CAE模拟及应用［J］.轻工机械，2007，25（2）：19-21.