《机电工程》杂志,月刊( 详细... )
中国标准连续出版物号: ISSN 1001-4551 CN 33-1088/TH
主办单位:浙江省机电集团有限公司
浙江大学
主编:陈 晓
副 主 编:唐任仲、罗向阳(执行主编)
总 经 理:罗向阳
出 版:浙江《机电工程》杂志社有限公司
地 址:杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel:+86-571-87041360、87239525
E-mail:meem_contribute@163.com
国外发行:中国国际图书贸易总公司
订阅:全国各地邮局 国外代号:M3135
国内发行:浙江省报刊发行局
邮发代号:32-68
广告发布登记证:杭上市管广发G-001号
在线杂志 |
当前位置: 机电工程 >>在线杂志 |
基于复杂性测度的零件序列图像融合方法研究
作者:夏敏磊1,郭 斌2 日期:2008-04-22/span> 浏览:3432 查看PDF文档
基于复杂性测度的零件序列图像融合方法研究
夏敏磊1,郭 斌2
(1.浙江机电职业技术学院 电子信息工程系,浙江 杭州 310053;
2.浙江省机电设计研究院有限公司,浙江 杭州 310009)
摘 要:通过分析零件序列图像的特点,研究了基于C0复杂性测度的图像融合方法,解决了传统图像融合方法(如空间域、变换域方法)都是将非线性的二维图像信号近似视为线性系统的局限性。仿真结果表明,采用该方法,能在融合性能的主观评价和客观评价等指标上,都优于目前普遍使用的图像融合方法,表明其具有广泛的应用前景。
Study of parts sequence images fusion based on complexity measure
XIA Minlei1, GUO Bin2
(1. Department of Electrinic & Information Engineering, Zhejiang Institute of Mechanical & Electrical Engineering, Hangzhou 310053, China;
2.Zhejiang Institute of Mechanical & Electrical Engineering Co. Ltd., Hangzhou 310009, China)
Abstract: A new image fusion method based on the C0 complexity measure was proposed by analyzing the property of parts sequence images. Image fusion methods, including spatial and transforming domain method, assumed the twodimension image as a linear system. Thus the new method solved this problem in a way derived from the linearity scientific field, ignoring the fact that the linear method dealing with the nonlinear twodimensional image signal is just a maximum likelihood approach. This new method is proved to be promised by the experiment by the fusion performance in the subjective evaluation and objective evaluation indicators. It is superior to the current widespread use of the image fusion method, demonstrating the broad application prospects.
Key words: image fusion; parts sequence images; C0 complexity measure
友情链接