基于LabVIEW的磁悬浮盘片控制系统*

作者：胡业发，李 可，吴华春 日期：2008-04-23/span> 浏览：4068 查看PDF文档

基于LabVIEW的磁悬浮盘片控制系统*
胡业发，李 可，吴华春
（武汉理工大学 机电工程学院，湖北 武汉 430070）

摘 要：磁悬浮盘片是采用主动控制方式并依靠电磁力实现对盘片支承的机电一体化系统。利用工控机加LabVIEW的控制平台（包括硬件平台的选择与配置以及软件平台的设计），将计算机强大的计算处理能力和仪器的测量控制能力结合在一起，使之具有程序编制简单、系统配置灵活、实时动态控制等优点。试验结果证明，该系统稳定、可靠，为磁悬浮盘状支承的相关研究提供了一个较好的平台。
关键词：磁悬浮盘片；LabVIEW；PID控制

Control system of magnetic suspended plane based on LabVIEW
HU Yefa, LI Ke, WU Huachun
(College of Mechanical & Electrical Engineering, Wuhan University of Technology, Wuhan 430070, China)

Abstract:Magnetic suspended plane is electromechanical system, using active control methods, and the plane is supported by electromagnet force. A control flat based on industrial control PC and LabVIEW was presented, which includes selection and cooperation of the hardware flat roof as well as design of software flat roof. Thus the computer formidable computation handling ability, the instrument hardware survey ability, and the control ability were unified together, so the system has following properties: pliable selection and cooperation the system, easy program, real time control. Result of experiment proves that, the system is stable and credible. It provides good platform for further researches about the supported structure of the magnetic suspended plane.
Key words: magnetic suspended plane; LabVIEW; PID control

参考文献(Reference):
［1］胡业发，周祖德，江征风.磁力轴承的基础理论与应用［M］.北京:机械工业出版社，2006.
［2］王晓光，姜 奎.磁悬浮盘片支承原理的研究［J］.湖北工业大学学报，2007，8(4):14-17.
［3］SILVA L D, HORIKAWA O. Experimental development of a onedegreeoffreedom controlled magnetic linear bearing［J］.IEEE Transaction on Magnetic,2005(11):4257-4260.
［4］杨乐平，李海涛，赵 勇,等.LabVIEW程序设计应用［M］.北京：电子工业出版社,2001.
［5］李秀娟，甄冒发.基于虚拟仪器技术在PID控制系统中的应用［J］.机电工程,2007，24(6):49-51.
［6］金志强，包启亮.一种基于LabVIEW的PID控制器设计的方法［J］.微计算机信息,2005(6):1-2.