Design of double tracks synchronous control and gluing system
LIU Zhi wei, XIONG Chang wei, MEI Yang han, SHU Yu feng
(Deparotment of Mechanical and Electrical Engineening, Dongguan Polytechnic, Dongguan 523808, China)

Abstract: In order to solve the problems of the low production efficiency of the gluing process and the dependence on manual operation, such as the sole, the plastic parts of the earphone, the mobile phone film, the leather products and so on, the computer control technology and motion mechanism technology was applied to the gluing process. After the analysis of the coordinate system of the double tracks synchronous control, took the contour of the back of sole as an example, the transmission relationship between the motor and the screw, and relationship between the feed position and feedback detection were established. A method was presented to control the double tracks synchronous for the gluing process。The gluing system were evaluated on the plane track control, the working hours comparison of the single track gluing and double tracks gluing were tested for several products. The experimental results show that the gluing time of the products by the double tracks gluing system is about 1/2 by single track gluing, and the gluing efficiency can be greatly improved by the double tracks synchronous control gluing system.

Key words: double tracks; synchronous control; gluing