《机电工程》杂志社科技期刊核心期刊论文投稿机电一体化机械、仪表电工自动化、计算机浙江大学主办

Introduction

International Standard Serial Number:

ISSN 1001-4551

Sponsor:

Zhejiang University;

Zhejiang Machinery and Electrical Group

Edited by:

Editorial of Journal of Mechanical & Electrical Engineering

Chief Editor:

ZHAO Qun

Vice Chief Editor:

TANG ren-zhong,

LUO Xiang-yang

Tel:

86-571-87041360,87239525

Fax:

86-571-87239571

Add:

No.9 Gaoguannong,Daxue Road,Hangzhou,China

P.C:

310009

E-mail:

meem_contribute@163.com

Influence of working medium properties on stiffness of water-based thrust hydrostatic bearing

Published:2022-02-23 author:HUANG Hong, HE Jun-jie Browse: 1331 Check PDF documents

Influence of working medium properties on stiffness of

water-based thrust hydrostatic bearing

HUANG Hong1, HE Jun-jie2

(1.Huailai Vocational and Technical Education Center, Zhangjiakou 075400, China;2. College of Mechanical and

Electrical Engineering, North China Institute of Aerospace Engineering, Langfang 065000, China)

Abstract: Aiming at the problem of low stiffness of water-based hydrostatic bearing, the relationship between the properties of working medium and bearing stiffness of water-based hydrostatic bearing was studied. Firstly, a stiffness evaluation device for water-based hydrostatic bearings was constructed by using trapezoidal lead screw, force sensor, displacement sensor and throttle. The stiffness of hydrostatic bearing could be calculated by the measured load and bearing displacement applied to the bearing platform. Secondly, tap water and pure water were respectively used as working medium, and the influence of working medium attributes on the stiffness of water-based hydrostatic bearing was investigated. Finally, in the case of changing the composition of the water and the temperature of the water of the bearing, the stiffness of the bearing was tested. In the test, the performance of the bearing was evaluated by measuring the load and stiffness of the bearing. The experimental results show that:
(1) with the increasing of bearing displacement, the bearing stiffness in both cases shows a trend of rising first and then falling;
(2) when pure water is used as working medium, the maximum bearing stiffness increases with the increase of water temperature in the range of 20℃ to 50℃;
(3) when tap water is used as working medium, the maximum bearing stiffness increases first and then decreases in the range of 20℃ to 50℃. The test results provide feasible suggestions for improving the stiffness of water-based hydrostatic bearings.

Key words: water-based hydrostatic bearing: bearing stiffness; working medium properties; water composition; water temperature

HUANG Hong, HE Jun-jie. Influence of working medium properties on stiffness of water-based thrust hydrostatic bearing［J］.Journal of Mechanical & Electrical Engineering, 2021,38(12):1611-1616.

Advanced Search

Online Office System

Chinese Core Periodicals
Chinese Sci-tech Core Periodicals
SA, INSPEC Indexed
CSA: T Indexed
UPD:Indexed