International Standard Serial Number:

ISSN 1001-4551

Sponsor:

Zhejiang University;

Zhejiang Machinery and Electrical Group

Edited by:

Editorial of Journal of Mechanical & Electrical Engineering

Chief Editor:

ZHAO Qun

Vice Chief Editor:

TANG ren-zhong,

LUO Xiang-yang

Tel:

86-571-87041360,87239525

Fax:

86-571-87239571

Add:

No.9 Gaoguannong,Daxue Road,Hangzhou,China

P.C:

310009

E-mail:

meem_contribute@163.com

Operation law and time sequence analysis of hydraulic control pumping systems
Published:2022-11-22 author:SHI Feng, WANG Chen, DING Hai-gang, et al. Browse: 572 Check PDF documents
Operation law and time sequence analysis of 
hydraulic control pumping systems


SHI Feng1, WANG Chen2, DING Hai-gang2, WANG Fu-xin1, ZHAO Yan-bin2

(1.Xuzhou XCMG SCHWING Machinery Co., Ltd., Xuzhou 221000, China;

2.School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou 221116, China)


Abstract: Due to the lack of joint analysis of the pumping and swinging links of the pumping system of the concrete pump truck, the commutation logic between the pumping unit and the swinging unit of the pumping system was still unclear. The dynamic characteristics and operation laws were studied.Firstly, the structure and working principle of the hydraulic control concrete pumping system were expounded. According to the measured data, a high-precision simulation model of the pumping system was established and verified. Then, based on the simulation model, the dynamic characteristics and operation law of pumping unit and swing unit were studied respectively. Finally, the coupling relationship between the pumping unit and the swing unit was analyzed, the commutation sequence of the pumping system was analyzed in detail, and the reversing sequence diagram of signal valve-swing valve-swing cylinder-main valve-master cylinder was drawn. The results show that the high-precision simulation model of the pumping system is established, the interaction mechanism between the pumping link and the swing link is clarified, and the sequential, coupling and cyclic relationship between the pumping and swing actions of the pumping system is revealed. It can provide technical reference for the design and structural optimization of concrete pumping system.

Key words: hydraulic transmission device; hydraulic control pumping system; commutation logic; swinging unit; reversing timesequence diagram; dynamic characteristics


  • Chinese Core Periodicals
  • Chinese Sci-tech Core Periodicals
  • SA, INSPEC Indexed
  • CSA: T Indexed
  • UPD:Indexed

Copyright 2010 Zhejiang Information Institute of Mechinery Industry All Rights Reserved

Technical Support:Hangzhou Bory science and technology

You are 1895221 visit this site