《机电工程》杂志社科技期刊核心期刊论文投稿机电一体化机械、仪表电工自动化、计算机浙江大学主办

Introduction

International Standard Serial Number:

ISSN 1001-4551

Sponsor:

Zhejiang University;

Zhejiang Machinery and Electrical Group

Edited by:

Editorial of Journal of Mechanical & Electrical Engineering

Chief Editor:

ZHAO Qun

Vice Chief Editor:

TANG ren-zhong,

LUO Xiang-yang

Tel:

86-571-87041360,87239525

Fax:

86-571-87239571

Add:

No.9 Gaoguannong,Daxue Road,Hangzhou,China

P.C:

310009

E-mail:

meem_contribute@163.com

Influence of blade perforation number on aerodynamic performance and noise performance of cooling fan

Published:2024-03-06 author:WANG Huawei, WANG Li, LIU Hanyang. Browse: 142 Check PDF documents

Influence of blade perforation number on aerodynamic performance and

noise performance of cooling fan

WANG Huawei1, WANG Li1, LIU Hanyang2, WANG Bo1, HU Li1

(1.School of Automobile and Traffic Engineering, Wuhan University of Science and Technology, Wuhan 430070, China;

2.The 722nd Research Institute, China Shipbuilding Co., Ltd., Wuhan 430223, China)

Abstract: In order to improve the aerodynamic noise of an automotive annular cooling fan, the blade structure of an annular cooling fan was taken as the research object, and the influence of blade perforation numbers on the aerodynamic and noise performance of automotive annular cooling fans was studied using numerical simulation methods. Firstly, the aerodynamic and noise performance calculation model of the cooling fan was established, and the large eddy simulation and the Ffowcs Williams and Hawkings (FW-H) equation were used to simulate and verify the calculation results. Then, the blade perforation positioning method was designed, and three perforation models were obtained and their aerodynamic and noise performance were simulated and calculated. Finally, the flow and sound fields of the original fan model and the blade perforation model were analyzed, the influence of different perforation numbers on the performance of annular cooling fan was obtained by analyzing the calculation results. The research results show that the perforated structure can effectively reduce the discrete frequency noise and total sound pressure level of the annular cooling fan, and the model B has the best effect, which is 4dB lower than the A-weighted total sound pressure level of the original fan model. Air volume and static pressure efficiency decrease with the increase of the number of perforations. By analyzing the flow field and sound field distribution of the annular cooling fan, it can be seen that the perforated structure can effectively reduce the generation of the low-speed recirculation zone at the tip of the blade, and inhibit the vortex shedding of the blade to a certain extent, thereby reducing the noise of the perforated structure fan. It can provide a new idea for the performance optimization design of the subsequent automotive annular cooling fan.
Key words: annular cooling fan; perforated structure; numerical simulation; discrete noise; eddy current noise; Ffowcs Williams and Hawkings(FW-H) equation

Advanced Search

Online Office System

Chinese Core Periodicals
Chinese Sci-tech Core Periodicals
SA, INSPEC Indexed
CSA: T Indexed
UPD:Indexed