《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于Nastran的汽车转向节危险工况有限元分析

作者:李立友,李芳,袁旦 日期:2010-06-21/span> 浏览:2925 查看PDF文档

基于Nastran的汽车转向节危险工况有限元分析
李立友,李芳,袁旦
(浙江工业大学 车辆工程实验室,浙江 杭州 310014)

摘要:为了分析某款车型转向节在穿过不平路面、紧急制动、最小转向半径且不侧滑3种典型危险工况下是否会出现静力破坏现象,建立了转向节有限元模型,对转向节的3种典型危险工况进行了力学分析,并基于Nastran对此转向节在3种典型危险工况及组合工况的静强度进行了有限元分析。有限元分析结果表明该转向节可以满足静强度要求。
关键词:转向节;有限元分析;应力;Nastran
中图分类号:U463.46;TP391文献标识码:A文章编号:1001-4551(2010)03-0038-04

Automotive steering knuckle finite element analysis based on
Nastran under dangerous working conditions

LI Liyou, LI Fang, YUAN Dan
(Lab of Vehicle Engineering, Zhejiang University of Technology, Hangzhou 310014, China)

Abstract: Aiming at analyzing the stress circumstances under typical dangerous work conditions of this vehicle types steering knuckle, such as uneven road, emergent braking and minimal turning radius without sideslip, the finite element model was made. The stresses of steering knuckle under the three typical dangerous work conditions were analyzed, the static strength of the steering knuckle under the three typical dangerous work conditions and combination conditions was analyzed by using a finite element method based on Nastran. The results show that this steering knuckle can satisfy the static strength requirements.
Key words: steering knuckle; finite element analysis; stress; Nastran
 



友情链接

浙江机械信息网