基于DDS的电子标签检测扫频信号源

作者：陈伟，杨成忠，吴炎彪 日期：2010-06-21/span> 浏览：3514 查看PDF文档

基于DDS的电子标签检测扫频信号源
陈伟，杨成忠，吴炎彪
(杭州电子科技大学 自动化学院，浙江 杭州 310018)

摘要：为了实现电子标签检测系统扫频信号源的设计，采用了直接数字频率合成技术（DDS），并根据检测系统的需求，选取了DDS芯片AD9830作为频率合成器件，辅助以高频功率放大电路，实现了主体硬件电路设计；通过软件的方式获得了以检测标签谐振频率为中心的2 MHz带宽、扫频时间可控的扫频信号源。研究结果表明，DDS频率合成技术，能较好地实现精度高、转换时间快的电子标签检测扫频信号源。
关键词：直接数字频率合成技术；扫频信号源；AD9830
中图分类号：TP274文献标识码：A文章编号：1001-4551(2010)03-0100-04

Swept signal source of FRID detection systems based on DDS

CHEN Wei, YANG Chengzhong, WU Yanbiao
(School of Automation, Hangzhou Dianzi University, Hangzhou 310018, China)

Abstract: Aiming at realizing swept signal source of radio frequency identification(FRID) detection systems, the DDS direct digital synthesis technology was used, and in accordance with FRID detection systems, DDS chip AD9830 was selected as the frequency synthesizer device. The main hardware circuit was developed and supported by highfrequency power amplifier circuit. And then the needed swept signal source was implemented by software, which the center of 2 MHz bandwidth is the resonant frequency of the tag and the sweep time would be controlled. The results indicate that DDS synthesis technology can realize signal source of high accuracy and fast switching time.
Key words: direct digital frequency synthesis(DDS); swept signal source; AD9830